|
|
 |
DHS® Basic Implant Set | | | General Information | |
| Vendor | | Synthes, Inc. | | Item | | DHS® Basic Implant Set | | Features | | Drill Bit/Tap Rack swings up from base for easy access to all guide pins, drill bits and taps, plus simple two-screw attachment allows easy removal to change set configuration
Angle Guide Rack can be moved closer to the operative field to facilitate the procedure
Screw Rack provides easy access to screws and screw length gauge, plus latchable lid facilitates maintenance of back-up inventory
Screw racks for self-tapping and non-self-tapping screws are easily exchanged
Allows separation for sterile monitoring, if desired
Modular Graphic Case provides maximum flexibility in the operating room, plus components can be easily removed and replaced
Organized from bottom to top of tray in general order of use | | Approval | | FDA | | Product Number | | DHS® Basic Set with self-tapping screws [105.837] and DHS® Basic Set [105.37] | | Instruments | | 2.0 mm Drill Bit, 100 mm, quick coupling, 2 each
3.2 mm and 4.5 mm Drill Bit, 145 mm, quick coupling, 2 each
T-Handle, with quick coupling
Tap for 4.5 mm Cortex and 4.5 mm Shaft Screws, 2 each
4.5 mm/3.2 mm Double Drill Sleeve and Insert Drill Sleeve
Holding Sleeve
Large Hexagonal Screwdriver Shaft and Screwdriver
Depth Gauge for large screws
Screw Forceps
4.5 mm DCP® Hip Drill Guide
2.5 mm Threaded Guide Wire, 230 mm, 10 each
135° - 150° DHS Angle Guide
DHS/DCS Direct Measuring Device
DHS/DCS Wrench
DHS/DCS T-Handle
DHS Triple Reamer, complete
DHS/DCS Tap, 12.5 mm diameter
DHS/DCS Centering Sleeve, short and long
DHS/DCS Coupling Screw, short and long
DHS/DCS Guide Shaft
DHS/DCS Impactor
DHS Reaming Head, short | | Plate | | Inquire | | Lag Screw | | Inquire | | Compression Screw | | Inquire | | Cortical Bone Screws | | 4.5 mm Cortex Screws, self-tapping
3 ea.: 28, 30, 48, 50, 52 and 54 mm 6 ea.: 44 and 46 mm; 8 ea.: 32, 34, 36, 38 and 42 mm 10 ea.: 40 mm
4.5 mm Cortex Screws
3 ea.: 28, 30, 48, 50, 52 and 54 mm 6 ea.: 44 and 46 mm 8 ea.: 32, 34, 36, 38 and 42 mm 10 ea.: 40 mm
| | Pricing |  | Inquire |
| | Product Description | |
| The DHS Basic Set is available with either self-tapping or non-self-tapping screws. Either instrument set provides complete instrumentation in one graphic case for use with the Universal Implant Set,for most Dynamic Hip Scr ew (DHS®) procedures.
| |
| Synthes, Inc. | | Customer Service: (800) 523-0322 | | Web site: http://www.synthes.com | | Please mention Medcompare.com when you contact the vendor. |
| NOTE: Medcompare disclaims any information on this site. The information found on Medcompare (Drug Guide, Product Listings and otherwise) is intended for use by medical professionals. This information is not intended to replace the information, advice or instructions from a medical doctor. Pricing information is approximate, actual prices may vary. |
|
|
