|
|
 |
DigiStim III Nerve Stimulator | | | General Information | |
| Vendor | | CCR Medical | | Item | | DigiStim III Nerve Stimulator | | Features | | The DigiStim III is a full-featured peripheral nerve stimulator in a convenient, hand-held unit.
Membrane touch-switches make the selection of stimulus functions easy.
The amount of current delivered to the patient is displayed in mA on a large, easy-to-real, digital LCD.
Nerves can be located precisely: the low-level output is adjustable in 0.1-mA increments from 0 to 6.0 mA.
In addition to the flash of the pulse LED, an audible indicator sounds as each stimulus pulse is delivered, enabling direct monitoring of the patient?s response.
The DigiStim III is delivered ready to use: Instruction manual, battery, and 6 foot leads with alligator clips are included. Mounting bracket optional. | | Approval | | Worldwide | | Product Number | | Item#7-NT-21 DigiStim III Nerve Stimulator
Item #7-NT-57 6 ft. Stimulator leads with alligator clips
Item #7-NT-67 6 ft. Stimulator leads with snaps
Item #7-NT-08 Mounting Bracket | | Current | | Adjustable from 0-70 mA | | Peripheral Nerve Locator | | Yes | | Peripheral Nerve Stimulator | | Yes | | Internal/External | | Request Information | | Available Patterns | | Standby: A standby switch maintains power to the instrument without generating stimulus pulses.
Twitch: 1 s (1 pulse/s); 2 Hz (2 pulses/s); 10 s (1 pulse/10 s)
Tetanus: 50 Hz (50 pulses/s) or 100 Hz (100 pulses/s)
Train-Of-Four: 4 pulses/2 s; repeats every 10 s | | Pricing |  | Inquire |
| | Product Description | |
Modes of Operation:
Standby: A standby switch maintains power to the instrument without generating stimulus pulses.
Twitch: 1 s (1 pulse/s); 2 Hz (2 pulses/s); 10 s (1 pulse/10 s)
Tetanus: 50 Hz (50 pulses/s) or 100 Hz (100 pulses/s)
Train-Of-Four: 4 pulses/2 s; repeats every 10 s
Output Current: Adjustable from 0-70 mA
Stimulus Pulse: Square Wave Monophasic pulses (200-us duration)
Indicators: Digital LCD shows current delivered to the patient in mA. Battery switch displays battery voltage on LCD. Pulse LED (red) flashes and audible indicator sounds each time a stimulus pulse is generated.
Power Source: 9-V alkaline battery (access door on rear panel)
Power Consumption: Approximately 7.6 mA
Case: High-impact ABS plastic with Lexan overlay on membrane touch-switches
Size: 2.09" H x 3.60" W x 5.75" D
Weight: 11 oz., Including battery
Warranty: 1 year, parts and labor | |
|
 |
| CCR Medical | | Customer Service: (888) 883-7331 | | Web site: http://www.ccrmed.com | | Please mention Medcompare.com when you contact the vendor. |
| NOTE: Medcompare disclaims any information on this site. The information found on Medcompare (Drug Guide, Product Listings and otherwise) is intended for use by medical professionals. This information is not intended to replace the information, advice or instructions from a medical doctor. Pricing information is approximate, actual prices may vary. |
|
|
